Hi, I have these numbers; 1.3L engine 42-47 ft lbs (57-65 Nm) 1.6L engine 58 ft lbs (78 Nm) 1.8L engine 51 ft lbs (70 Nm) While holding the flywheel with a holding tool tighten the bolts (put a small amount of Loctite 414 or similar on the bolts first apply the Loctite on the end of the bolt that way when you tighten the bolt, the Loctite will work its' way up the threads) finger tight first then in a crisscross pattern. 12 o'clock, 6 o'clock, 1 o'clock, 7 o'clock, 5 o'clock, 10 o'clock, these are the bolt positions. Steve H.
so the head wont warp
what is the timing specs for a 95 geo tracker
8 degrees BTDC
The Torque Specs for a 1992 Geo Prizm are 101 ft-lbs @ 4800rpm. In addition it has a capabilty of 102hp at 5800rpms.
The torque on my 1993 is 46 ft lbs.
torque flight transmission
torque converter control
(1995) ( Geo) ( tracker ),the wheel light comes on with the hubs locked in and the shifter in , but the 4 wheel drive does not appear to be locking in.
you can find it at autozone.com
This web site lists some specs. that might help. I don't know how accurate they are so I can't recommend you use them. http://www.rockfordcv.com/Geo_torque.htm
The Geo Tracker weighs about 2238 pounds and can pull about one thousand pounds. It has a wheel base of 86 inches.
18 lbs