it is in micro seconds
TTL
The product of propagation delay and power dissipation is called Speed power product.
DRL cannot invert signals.
To know about the advantages of TTL logic family, one should have a basic idea about RTL, DTL etc. Diode logic (DL) uses diodes to implement logical functions like AND and OR. But the disadvantage is that it can not perform NOT operation. As AND and OR are not complete functions by themselves, they can not perform several logic functions without NOT. Hence, there was a need for some device which can perform a NOT function as diodes can not. That device is a transistor. Then came the DTL which uses a transistor along with diodes. As a transistor can act as an inverter, NAND (NOT-AND) & NOR (NOT-OR) operations can be performed. But this logic uses several diodes which will slow down its operation. Due to the delay offered by them, the logic levels may sometimes change i. e. 0 t0 1 or 1 to 0. Then came TTL. This logic uses a multi emitter transistor, a transistor with many emitter terminals. As every emitter is nothing but a diode, this logic eliminates the use of all diodes. This is the major advantage. As transistor becomes ON and OFF much rapidly than a diode, switching time will be faster. TTL, or Transistor-transistor logic replaced resistor-transistor logic, and used much less power. The TTL family is very fast and reliable, and newer faster, less power-consuming, etc. types are always being developed. = In TTL (Transistor-Transistor Logic), think that the device using this technology is made from several transistors. Another advantage is that many more chips employ this technology.
I believe that is resistor transistor technology TTL transistor transistor logic
TTL
Here are the propagation delays for these gatesa) ECL = 2nsb) TTL = 1.5-33ns depending on the type of TTL. Conventional TTL is 9ns, Advanced Schottky TTL is 1.5nsc) RTL = 25nsd) CMOS = 5-20ns depending on if it is conventional CMOS, TTL pin compatible CMOS, high speed TPC CMOS or TTL compatible CMOSSo the fastest would be the Advanced Schottky TTL (74ASxx) at 1.5ns but the choice simply said TTL which I would interpret as Conventional TTL (74xx/54xx) which would have a propagation delay at 9ns.So the winner is ... (a) ECL which has a propagation delay at 2ns.
The product of propagation delay and power dissipation is called Speed power product.
TTL is faster and does not lose amplitude
TTL is a logic family. A logic family is the set of logic gates designed using a specific approach. Or simply speaking, logic family is the way of implementing logic. TTL stands for transistor - transistor - logic. It involves transistors (BJT) to implement logic. TTL applies means TTL logic family is used or can be applied in that specific application.
TTL is a logic family. A logic family is the set of logic gates designed using a specific approach. Or simply speaking, logic family is the way of implementing logic. TTL stands for transistor - transistor - logic. It involves transistors (BJT) to implement logic. TTL applies means TTL logic family is used or can be applied in that specific application.
TTL stands for "transistor-transistor logic" and consists of using BJT's ("bipolar junction transistors") to conduct the logic for the circuit.
in the electronics domain it is called propagation delay and it has different-2 values on different -2 places.for example for ttl ics it is about 7.5 nano seconds.it is very considerable when we design a logic circuit.and the effect are called hazards some times.
transistor transistor logic
TTL
DRL cannot invert signals.
The switching time (on and off) of the TTL logic gate is very fast in comparison with CMOS logic gate. However, they could not tolerate higher range of power supply.