1983 Chevy 305 diagram, waterneck, thermostat housing and fittings
It is 305
305 cubic inches 305 cubic inches
I think itsweight of matador 305 is 3212 lb (1457 kg) (LS) 3239 lb (1469 kg) (SS).
it depends if you have a 305 or 305ho , 305 8:1 compression cupped cylinders 305ho has 9:1 compression with valve cut pistons
10w30 weight oil.
Yes, but the exhaust Y pipe from the 305 may not fit the 350.
His height is 6 ft 10.5 in and his weight is 305 pounds.
Ever heard of Google.com?
Depends on what the 305 is in, a 305 camaro engine needs like a 9 tooth starter because the fly wheel is 12.75 inches in diameter with 50 some teeth. A 305 in a Chevy half ton will have like a ten tooth starter for the 14.25 inch diameter flywheel that has like 60 some teeth. All 305 engines before 1986 are the same they did have different flywheels for what ever Chevy put them in. 1986 and newer 305's had different cranks the flywheel bolts up different on a 1986 305 compared to a 1983 305.
It's sitting on top of the distributor cap.
That's what the gas pedal does.
what is curb weight of a 1983 Chevrolet Silverado 1500
there was no 350 in the camaros in 83 just 305 and v6
In the Camaro (1983 - 86) the H.O. 305 was rated at 190 hp In the Monte Carlo SS (1983 - 1988) the H.O. 305 was rated at 180 hp Differences between the high outout model and the regular 305 included: 9.5:1 compression, cylinder heads from the Crossfire Injection motor, an aluminum dual-plane intake manifold and a cam from the L-82 Corvette.
I would go with 10w40.