X-Ray voltage means voltage which is applied across anode & cathode, this is of very high voltage (in KV). This causes a high electric field for the moving of electrons emitted from cathode to anode. One more voltage wrt X-ray tube is filament voltage. Filament voltage with some appropriate current is applied to filament for the emitting of electrons. This current is proportional to the intensity of X-ray radiation generated from the tube. More current through the filament causes permanent damage of filament.
Power of the X-ray tube, voltage applied, current intensity, anticathode type, filters, collimator, tube design, working atmosphere, etc.
A: xray emits from TV, OSCILLOSCOPE and some more instruments due to requirement of hi voltage to see the display
Voltage x Current = Power So Power / voltage = current Now you do the math
25 thousand volts
The choke works in conjunction with a starter . When you turn on the light , voltage is applied to the choke, and when the switch opens after a few seconds, it creates a high voltage across the contacts at each end of the tube. This starts the ionization of the gas , which glows. Once ionized, it continues producing light even when the voltage applied is only 120 VAC, the power line voltage.
Power of the X-ray tube, voltage applied, current intensity, anticathode type, filters, collimator, tube design, working atmosphere, etc.
mA
primary radiation
We're talking about high voltage when we talk about the operating voltage of a cathode ray tube (CRT). The operating voltage can vary, as you can imagine. Tens of thousands of volts are not uncommon.
1 mGya/hr at 1 meter.
They are radiologic technologists, or radiographers for short.
Confirming Nasogastric tube placement must be done through pH testing and xray, not by using the whoosh method.
120
Neon gas has a break-down voltage of about 70 volts. When the gas (in a neon voltage regulator tube) breaks down, the gas glows red. If more voltage is applied (within sensible limits) the voltage drop across the neon VR tube will still be 70 volts. This action by itself could result in a large current flowing in the gas tube and possibly to destroy it, so a resistor is placed in series with the neon VR tube to limit the current. And this is better for the neon tube as well. THUS a neon voltage regulator tube forms a reference voltage which can be used, with clever circuitry, to regulate any voltage. Other gas mixtures are used for other voltages. There are solid-state devices with similar properties.
This beam of electrons is emited by the cathode under voltage difference.
11000
yes, effectively a voltage controlled conductance. (conductance being the reciprocal of resistance)