Dexron III
The automatic transmission temperature sensor, on your 1990 Mitsubishi, is located on the top of the transmission. The sensor will have to electrical wires going to it.
The fuse for the computer in Mitsubishi Montero 1990 is located under the plate called fuse panel. This is where you will find the fuse.
The 1990 Mitsubishi Montero 3.0 V6 is listed as a non-interference engine. Replace the belt every 60,000 miles.
1990 will most likely be SOHC, so 12 valves.
go to the makers web site or google
Mitsubish Diamond SP II or Castrol sells a multi-vehicle application fluid including this type
What kind of transmission fluid is used for a toyota camry 1990
Yes it can.
Try calling your local wrecking yard as they have crossover books.
I have a 1990 Ford Ranger XLT 5 speed 4x4 2.9L standard transmission. I recently had this question and this is what my manual says: For 1988 and on Mitsubishi transmission use SAE 80W transmission fluid For 1988 and on Mazda transmission use Mercon automatic transmission fluid For the transfer case '88 and on, it uses the Mercon automatic transmission fluid. The differentials use a "high grade lubricant" that is a different fluid than the transmission uses. I used Haynes. Look on page 1-2 for a list of all the lubricants and fluids and Chapter 7 for more information about the different transmissions.
On a 1990 Ford Ranger : That depends on which 5 speed manual transmission you have The Mitsubishi ( transmission code " D " ) takes ( 2.4 U.S. quarts of 80-90W gear lube The Mazda ( transmission code " M " ) takes ( 2.8 U.S. quarts of MERCON automatic transmission fluid
You are going to need a long funnel as it goes into where you pull the dipstick for the transmission fluid out