0
an oil that has a high zinc content
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What type of oil should I put into my 1984 Pontiac Fiero?
The weight is either 5W30 or 10W30 The trick is to find an additive for "Flat Tappet or Flat Lifter" Engines Current oil will not protect your engine properly without this!
Why is your rover ticking when its cold?
hydraulic tappet's does it have enough engine oil if yes flush engine oil and add new
What oil should you use in your 62 Chevy?
Mobil 1 High Mileage Full Synthetic 10w40, You MUST add a bottle of ZDDP zinc additive to the oil or the flat tappet cams go flat. Tell ALL your friends!!!! You don't have to change oil for 15k miles. Really! Puralator makes good stuff.
What make your valves rattle excessively on 5.8 ford engine?
wrong viscosity oil, bad oil pump, bad hydraulic lifters,or loose tappet rockers
What is the of tappet cover?
to keep dirt out and oil in
What is the function of tappet cover?
to keep dirt out and oil in
Why does engine rattle when cold but stops when warm rover 25?
engine rattles when cold are usually caused by lack of oil circulation in engine. this can be caused by old oil, wrong oil viscosity.or incorrect valve tappet clearences your vehicle may just need a good old fashioned tuneup and oil change
Why is the engine still ticking if I recently changed the oil?
Sounds like a loose tappet in the header, though I'm just a back yard mechanic.
What year model is 14093638 for a Chevy truck?
86--87 350 with 2 or 4 bolt mains Roller or flat tappet Camshaft and a 1 piece rear oil seal.
Where is the engine number located of a Renault 6x2 2002 model tractor unit?
The engine number on a Renault 6x2 2002 model tractor unit is located on the cylinder block on the machined flat surface. It is stated that the number is just above the oil filler tube and below the valve tappet cover on the left side of the Renault 6x2.
How can you tell if the hydraulic tappet lifters are worn?
You will hear a clear tikking noise, and the engine will use more oil than normal.And somethimes you will only hear it when you let of the gas pedal
How do you remove a oil pan for a 1991 BMW 318i?
Park your car on a flat surface and make sure your engine is cool before going under the car. The oil pan should be on the center of the engine and will be a small pan that you can unscrew. Before draining the oil pan place a oil catch or oil tray underneath the cars oil pan so it can catch the oil that is being drained. Replace the oil into the engine before driving again.
