0
What should you do to remove a broken torx tool inside a bolt?
Wiki User
∙ 13y ago
If the broken piece is not jambed tight in there, try using a strong magnet to lift it out of there.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What should you do 99 accord ex alternator bolt broke?
You will have to use an Easy Out to remove the old broken bolt.
What kind of tool do you need to remove a broken bolt in engine?
generally to remove a broken bolt, you will need a drill and an easy out
How do repalce a Broken bolt on a 1982 Honda thermostat housing?
If the bolt broke off inside the block, you can purchase a tool called an easy out. This tool allows you to remove any broken bolts of various sizes.
How do you fix a broken valve cover bolt on a Chevy 1500 with a 5.3?
Remove the broken bolt and replace it with a new one. There are several ways to remove that broken bolt. You can remove the valve cover and weld a nut to what is left of the bolt, wait for it to cool off then unthread the broken bolt. You can also drill out the center of the broken bolt and use an easy-out. You can also drill into the broken bolt with a left handed drill bit, sometimes the drill bit will catch and spin out the broken piece. I would go with the first suggestion.
How can you remove the coolant overflow container in a 4 Runner The top of the front bolt on the battery clamp is broken and you need to get at the bottom of the bolt to get it out?
Use a bolt extractor to remove the broken battery bolt..This is the easiest way...
How do you remove a broken bolt of the inside of a water pump in a Chevi lumina 93?
get a easy out from the part store.. you will also need a GOOD drill
How can you get a broken bolt out?
You drill the proper size hole in to the bolt and remove it with an E-Z Out.
What do you do if pulley wheel bolt is broken on a Honda Prelude?
Depends on which pulley but most have several bolts holding them on. You can remove the broken bolt or simply not worry about it.
Must you remove the exhaust manifold to get a broken bolt out of the flange that connects to the engine?
The broken bolt can be blown out by someone who knows how to use a torch - muffler-shop
How do I remove a broken tensioner bolt from the block 2005 ( Dodge Ram 1500 )?
Weld a larger nut over the broken bolt and let it cool. It will turn out for you.
How do you remove a broken valve cover bolt on a small block Chevrolet?
the easiest way is to drill it out. drill a hole thru center of broken bolt, make sure it is smaller then the diameter of the bolt. after drilling use a easy out to remove the threads of the bolt. check that the threads in the head are ok! then put in new bolt.
How do you remove lawn mower blade holder.I have a broken bolt that will not come out of blade holder.I want to remove the holder from engine shaft.?
Remove the bolt holding the blade to the left
