Want this question answered?
7 mm. You can buy this.
the caliper bolt should be a 13mm and the bracket or "bridge" bolt should be an 18mm or a 21mm
To replace brake pads and rotor: Unbolt wheel, unbolt caliper, remove caliper, unbolt caliper bracket, remove rotor, replace rotor, bolt up bracket, compress caliper, replace pads, replace caliper, bolt up caliper, bolt up wheel, repeat whole thing on other side...
Assuming this is a 4+4 vehicle, the caliper bolts on to the caliper bracket. The caliper bracket bolts on to the steering knuckle.
The Rear Caliper Bottom Bolt head size is 12 mm. The Top bolt is enclosed only making it a slide bolt therefore you cant and really have no need to remove it. So the only bolt you should remove is the bottom 12mm head bolt. Then there will be a 14mm bolt that will hold the Emergency Brake Cable Bracket to the Caliper. Loosen this bolt and remove the Emergency Brake Cable Bracket from the Caliper. Then pry the bottom of the caliper up off the disc. This will allow you to swing the caliper up then push the caliper back to slide the caliper off the enclosed bolt slide at the top of the caliper. This will allow access to the inside and outside pads to remove them and allow you to press and rotate the Piston (Push and Twist-in Pistons) back into the Caliper with the right Brake Caliper Compression tool. The rear two Caliper Bracket bolt head sizes are 18mm. You must remove the Caliper bracket in order to remove the rear brake disc. The Front Brake Caliper Bolt is a 3/8" Allen head bolt. There will be two bolts holding the front calipers to the Spindle. The Front calipers are standard push-in Pistons.
If memory serves, 18mm. That would be the bracket bolt. The caliper bolt has a 9mm thread.
what is the tork for the intake(bolt 8mm) v6 3l 2001 Mazda tribute es
The calipers need a 7 mm hex wrench. The Caliper holder to remove the rotors takes an 18mm socket. This is a 2003 Ford escape..apparently it's the same as a Mazda tribute.
brake caliper bushings are the rubber mounts that sit inside the caliper bolt holes. They help guide the bolts when bolting the caliper up to the caliper bracket.
_________________________________________Front caliper bracket mounting bolt-148 ft-lb Front caliper guide pin bolt-74 ft-lb
you have to turn the piston like a bolt
15 mm is the size,for caliper bolts caliper bracket bolt is t60(it is star shaped)