0
What size bolts are on the thermostat housing on 2002 Buick rendezvous?
Wiki User
∙ 8y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Where is thermostat located in 1989 buick lesabre?
Follow the top radiator hose to the top of the motor and it should be fastened to a housing. The thermostat is inside this housing which comes off with two bolts. You may have to buy a gasket for this housing when you purchase the thermostat.
How do you change thermostat on 2002 buick rendezvous?
Thermostat ReplacementRemoval Procedure1. Remove the air cleaner and duct assembly.2. Drain the coolant until the coolant level is below the thermostat.3. Remove the crossover exhaust pipe.4. Remove the radiator hose from the thermostat housing.5. Remove the thermostat housing bolts and clean any sealer from the bolt threads.6. Remove the thermostat housing and gasket.7. Remove the thermostat.8. Clean the mating surfaces.Installation Procedure1. Install the thermostat.2. Install the thermostat housing and gasket.Notice: Refer to Fastener Notice in Service Precautions.3. Install the thermostat housing bolts. Tighten the bolts to 25 Nm (18 ft. lbs.).4. Install the radiator hose to the thermostat housing.5. Install the crossover exhaust pipe.6. Install the air cleaner and duct assembly.7. Fill the cooling system.
How do you change the thermostat on 2002 buick rendezvous?
Thermostat ReplacementRemoval Procedure1. Remove the air cleaner and duct assembly.2. Drain the coolant until the coolant level is below the thermostat.3. Remove the crossover exhaust pipe.4. Remove the radiator hose from the thermostat housing.5. Remove the thermostat housing bolts and clean any sealer from the bolt threads.6. Remove the thermostat housing and gasket.7. Remove the thermostat.8. Clean the mating surfaces.Installation Procedure1. Install the thermostat.2. Install the thermostat housing and gasket.Notice: Refer to Fastener Notice in Service Precautions.3. Install the thermostat housing bolts. Tighten the bolts to 25 Nm (18 ft. lbs.).4. Install the radiator hose to the thermostat housing.5. Install the crossover exhaust pipe.6. Install the air cleaner and duct assembly.7. Fill the cooling system.
How do you replace the left driver's side mirror on a 2002 Buick Rendezvous?
Remove door panel, then three bolts on mirror inside the speaker housing area.
What are the Torque specs for 1995 Toyota thermostat housing?
The 1995 Toyota Tacoma thermostat housing torque specification is 40 pounds. The amount of torque on the thermostat housing bolts is not that important. You basically do not want to break the thermostat housing bolts.
Where is the thermostat located on a 1989 Buick Century?
there are 2 large black hoses that come off of your radiator. the one located higher on the radiator (upper radiator hose) goes from your radiator to the thermostat housing. the thermostat housing is a metal tube that is bolted to the engine. the thermostat is located inside of the housing and can be accessed by removing the bolts
Where is thermostat located ea falcon?
Where the upper radiator hose connects to the engine you will find the thermostat housing. Under that housing is the thermostat. Usually has 2 bolts holding it on.Where the upper radiator hose connects to the engine you will find the thermostat housing. Under that housing is the thermostat. Usually has 2 bolts holding it on.
How do you remove the thermostat housing bolts on a 1985 Buick Electra Park Avenue?
Two 1/2" or 13MM bolts hold it on. But, you may have to move the alternator, or it's bracket to reach them.
Where do you fing the thermostat on a Renault Megane?
top hose from radiator will travel to the thermostat housing. thermostat is in this housing. normally has 3 bolts to remove the housing
How do you replace a thermostat on a Buick rendezvous?
I had to pay a dealership $450 to change the thermostat on the 3.4L engine. You have to remove the crossover exhaust manifold. Once that is out of the way, the thermostat itself is easy. Before the manifold is removed, I could only touch one of the two bolts holding the thermostat housing in place, much less get a wrench on it. Good Luck! after i read this i had to say something. I've changed thermostat on a 2002 Buick rendezvous before, it wasn't hard and you don't have to remove the exhaust crossover pipe.I could not reach the back two bolts on the cross over manifold, so I took off the last piece of the air intake where the throttle position sensor is located. At that point I could get a wrench down there a slowly loosen the lower bolt enough to slide out the thermostat housing, and eventually the thermostat. It took me a couple of hours to complete a task that on any other car would take 30 minutes or so.
How many bolts on thermostat housing?
In most cases the thermostat housing has four retaining bolts. The exact number of retaining bolts is dependent upon the year, make, and model of the engine.
How do you change the thermostat on a 2003 Buick Rendezvous?
You have to remove the part of the exhaust manifold that wraps around the driver's side of the engine, which is no easy task! The thermostat housing is behind that manifold. There is a small cast iron pipe leading out toward the radiator with a radiator hose attached to it. Follow that iron pipe in toward the engine, and you will see where to remove the two bolts to get to the thermostat. The designers did not think about the auto owner on this one.
