36mm. You really should have a 3/4" drive ratchet to get this off, because they start at 220 lb-ft and get tighter as you drive. I've broken five flex-head breaker bars over the years removing this one nut.
It'll go right on.
1972 Super Beetles had 4 drum Brakes. I know, since I own one. Richard
Brake drums can be resurfaced by turning the brake drum in a brake drum lathe. When the brake drum has deep grooves in it, it cannot be repaired.
A drum brake is a brake that uses friction caused by a set of shoes or pads that press against a rotating drum-shaped part called a brake drum. The term drum brake usually means a brake in which shoes press on the inner surface of the drum.
A drum brake is a brake that uses friction caused by a set of shoes or pads that press against a rotating drum-shaped part called a brake drum. The term drum brake usually means a brake in which shoes press on the inner surface of the drum.
the emergency brake is drum brake inside the hub of the disk brake. to adjust them is the same as adjusting any other drum brake get underneath the car and you will find a asmall rubber cover on the back of the drum.remove that and you can insert small screwdriver or adjusting tool to adjust your brakes
The drum and the brake shoes.
In case of cost..drum brake is better than disc brake.
Remove the tire and hammer on the front of the drum until it comes loose. 99% of the time, rust is holding it on super tight.
The purpose of a drum brake is to come to a complete stop with any veichle that may have drum brakes in the rear of the car.
how to remove rear brake drum on 1994 cavalier
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.