Want this question answered?
9mm
Torx T 40 socket
To remove the calipers just knock out the two square pins that are on the top and side. The best way i found to do this is use a long socket extension. put the insert end (the end you would put the socket on)against the pin and tap on the other side .
15 mm socket and ratchet for the caliper to bracket. if not it is a 13 mm socket and ratchet. the bracket to spindle is 18mm socket and ratchet
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
17 mm wrench or socket
3/8 inch Allen
You will need a 5/8 socket.
You will need a 35 mm socket.
FIRST, YOU REMOVE THE TIRES THEN YOU GET EITHER 3/8 OR 10 MILLIMETER HEX SOCKET TO REMOVE THE CALIPER. REMOVE THE BRAKE LINES AND PULL HER OFF. INSTALLATION IS REVERSE
You'll need a 5/8" socket.
9MM