0
What size socket to remove brake caliper on a 1997 Oldsmoble Bravada?
Wiki User
∙ 14y ago
I believe that is a 3/8" allen.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What size Allen socket is needed to remove caliper bolt on a 2004 Escape?
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
What tools are needed to change the rotors on a 2007 Camry?
21mm socket and breaker bar to remove lug nuts, and a 17mm socket to remove the two caliper bracket bolts, and a 14mm socket or wrench to remove caliper from bracket. you will also need a c-clamp to shove caliper back.
How do you disconnect the rear caliper and rotor?
in order to remove the rear caliper, you first remove the parking brake cable using a 14mm socket to remove the bolt. After removing the parking brake you can remove the caliper carrier, using a 17mm socket to remove the two caliper carrier bols this allows you to remove the caliper from the rear rotor, you can slide the caliper off of the carrier to remove it completely. to remove the rotor you can use a soft faced mallet and gently tap the inside of it and it should come right off.
How do you remove a cat converter 98 bravada?
you will need a exhaust pipe cutting tool and a socket set
What size torque socket do you need to remove the brake caliper on 2001 VW jetta 20?
it is an Allen wrench not a TORX socket
How do you change front brake pads on 1979 Camero?
Jack up front end, remove wheels. Use Allen wrench or Allen socket to remove 2 pins holding caliper on . Remove caliper by sliding it off the rotor. Remove pads from caliper. Press piston back into caliper with c clamp. Replace pads, reinstall caliper and pins.
What size Allen socket is needed to remove bolt from caliper on 2002 ford escape?
I have a 2003 Escape and it took a 7 mm socket.
How do you remove the front brake pads on a 2002 ford expedition - do I need a special tool?
You will need an 18mm socket and T45 torx (star) socket also. These will be used to remove the caliper from the rotor. The caliper has 2 parts that use a rail to align themselves and the brakepads.
Do you need special tool to remove front caliper from 2002 Chevy Express van?
There is no need for a special tool to remove the caliper. It is removed like most other GM calipers. Retract the piston in the caliper and remove the Allen bolts that mount the unit to the A frame, then raise it up.additionThere is a special socket available at any parts store which is alot user friendly than fighting with sticky caliper pins with an Allen wrench. it's a 5 dollar socket that is basically an Allen wrench head jammed into a socket.
What size tool to remove caliper on Saturn L 200?
7mm hex socket for the front caliper and 10 mm hex for the bracket bolts. For the rear if you have disc it's 19mm for the caliper
What size socket is needed to remove caliper bolts on a 1996 Chevy s-10 4x4?
A 3/8" Allen socket or wrench will work.
How do you remove the front rotor on a 2002 Dodge caravan?
- remove wheel - remove clips holding pads on - loosen bleeder valve and compress cylinder - remove recessed bolt on back of caliper (10mm deep socket) - remove caliper - slide pads off
