T55, I just changed my brakes on 2003 Astro. If you've used another size as I did you may have burs in it. Tape it with hammer.
You need to remove the wheel, the caliper and the caliper mount. After you do that you can remove the caliper.
To change the disc brake pads on a 2003 F250 you will first need to remove the wheel and tire. There are 2 caliper bolts behind the caliper which need to be removed. Then use a special tool or C-Clamp to push in the caliper pistons and replace the disc brake pads.
caliper has two type of bolts ,one is a allen, other has a rubber on it i removed the rubber on that one, now i have to return the rubber but the caliper needs to be pulled off but i cant , do i need a special tool to remove that bolt with no head . that has that rubber jacket
The calipers need a 7 mm hex wrench. The Caliper holder to remove the rotors takes an 18mm socket. This is a 2003 Ford escape..apparently it's the same as a Mazda tribute.
there should be 2 bolts which hold the brake caliper on the rotor u will need to remove them to remove the caliper then just use a screwdriver to pop the pads off the caliper u will also need a C clamp to compress the piston back in the caliper or u will not be able the replace the caliper on the rotor
no, remove the caliper and the caliper mountaing bracket, if it is on the front you may have to remove the axle not but there is no need to remove any steering part
a brake caliper tool (really)
You will need a hex key to remove the brake caliper on an '05 Navigator. There will be two bolts that need to be taken off with the hex key.
i have a 2003 chev astro van and need to replace the blower fan
Hose?
I don't know what size but on an 01 S60 you need an Allen wrench.
You need a 3/8" Allen wrench to remove them.