answersLogoWhite

0


Best Answer

I used a T-45 torx bit. However it felt a little loose, so the correct size may be a T-47. But the T-45 still worked for me.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What size torx bit to use to remove front brake calipers 1998 ford expedition?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the torque specs for the brake calipers on a 2000 expedition?

Front disc brake caliper bleeder screw: between 13-18 ft. lbs


What size Allen wrench to remove the front brake calipers on a 2000 ford focus?

7mm


What size bolts hold the front brake calipers on a 1997 expedition?

Your local parts store should be able to help / answer that question.


How do you replace front brake pads on a Saturn L300?

Lift the car on a car jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Next, dispose of the old brake pads, put in the new brake pads, replace the brake shoe/calipers, replace the tire and lower the car to the ground.


How do you replace the front brake pads on a 1994 Ford Escort?

Lift the car, remove the tire and set aside, remove the brake shoe/calipers and remove the old pads. Replace the old pads with the new pads, replace the brake shoe/calipers, replace the tire and lower the car.


Do you compress front brake calipers the same way as rear calipers on a 2006 ford freestyle?

No need to rotate the front caliper pistons as you compress the front calipers. That process is only for the rear calipers because of the parking brake mechanism.


How do you replace the front brake rotors on a 2000 Maxima?

Remove the front wheel. Loosen and remove the two 15 or 17 mm bolts securing the calipers in place (access from the back side of the calipers). Lift the calipers out of the way and your rotor will be somewhat loose. Pull off the rotor.


What size Allen wrench needed to remove front brake calipers on 2006 sebring?

I believe that will be a 7mm Allen key.


Do you haft to pull front axle to change brake pads on your 1989 Ford F-250 4wd?

No. just remove the calipers


How do you replace the front brake pads of a Pontiac Grand Prix?

Remove wheel, remove the two bolts in the calipers, pull up calipers, remove pads compress caliper piston with a c-clamp, be sure to have the brake fluid cap off the reservoir under the hood. - replace pads and reverse the order.


How do you remove the front brake rotors on a 2002 century?

there are two bolts that hold brake calipers to a u shaped bracket, remove them and then remove the two bolts holding the u shaped bracket. The rotors will come off at this point.


How do you replace front disks in a 98 falcon?

Are you asking about brake discs?A re't they slip off rotors? remove the front tires then the calipers then slip off the rotors.