Number 10 Torx works on a 2003 Jeep Wrangler. Fairly simple. Just remove the 3 holding the rim on, then the 4 holding the lamp in. I was able to change 2 lights in less than 1/2 hour.
Truck headlights can be found at your local auto supply store. Unscrew the cover for the old headlight, remove it and then remove the old headlight. You will need a screwdriver and possibly a wrench for this. Next, replace the broken headlight with the new one, and replace the headlight cover. Lastly, check to make sure the new headlight works.
You have to remove the headlight which has 3 bolts(10mm socket&wrench) on top of it.
you get a wrench and wrench it up
To replace the brake pads on a Toyota Tercel a jack is needed. Some other tools that will be used are a socket wrench, screwdriver, lug wrench, and a pair of pliers.
cut the wires off the old one and use a six point socket to remove and replace with an open end wrench
To replace the headlight bulb on a 1999 Porsche Boxster you will need to open the trunk and take out the screw of the spare tire compartment. Slide the entire headlight assembly out after loosening it with a hex socket wrench. Then, put a new bulb in place.
Under the passengers seat.
If it is like mine you have to remove the whole fixture to get to the headlight and park light/turn signal, but it not really that hard I think you just need a 10mm socket and wrench but I might be off on the size of the wrench.
The clamp bolt is a 10 mm.
A simple adjustable wrench is all you need to replace the plumbing under a kitchen sink. It's a simple procedure.
To replace brakes effectively, you need to know what type of brakes you have. In general, you will need a jack, new brakes, a wrench and Allen wrenches.
Normal mechanics tools and a good torque wrench.