3/8 Allen wrench
A 5/16 brake wrench
Either 7/16ths or 10mm
What size wrench do you need to change the front brakes on a 2001 dodge durango?"
I believe that would be a 3/8 Allen wrench. -Very common on Dodge /Plym brakes.
what size allen wrench do i need to change front brakes on a 2004 dodge grand caravan
7 mm
you go to a mechanic, because this is probably the best advice you will get on the web.
Yes, I recommend you bleed all brakes starting at the RR then LR, then RF, and end at the LF. It may not be absolutely necessary but then again it may be. To be safe just bleed them all.
from the furthest caliper from the master cylinder. Start with that one and move closer.
fill the clutch resivoir pump the clutch pedal open the bleeder screw and tighten it back up and repeat until the air is out and just fluid comes out
bleed your brakes there might be air in the lines or the brake booster is bad try to bleed all 4 brake 1st
It should be a 7 mm Allen.