Want this question answered?
If a vacuum modulator has fluid in the vacuum port, it has failed and should be replaced.
check for a failed vacuum modulator or a vacuum leak to the vacuum modulator. It sounds like you are shifting on the governor or engine management unit.
The transmission does not have a vacuum modulator.The transmission does not have a vacuum modulator.
2001 Montana has an electronic transaxle. There is no vacuum modulator. The 2001 Montana has an electronically controlled transaxle. There is no vacuum modulator.
The transmission on a Chrysler Sebring does not have a vacuum modulator.The transmission on a Chrysler Sebring does not have a vacuum modulator.
The transmission in a 1991 Chrysler does not have a vacuum modulator.The transmission in a 1991 Chrysler does not have a vacuum modulator.
On some of the older vehicles the vacuum modulator controlled the shift points of the transmission by using the vacuum supplied from the engine.
I assume your refering to the vacuum modulator which controls transmission shift points. Remove the vacuum hose from the modulator. Using a small screwdriver, turn the screw inside the modulator. It may take several tries to get it right.
There should be an o-ring where the modulator is inserted into the transmission. There should be no fluid where the vacuum line attaches, if so the modulator is bad.
A vacuum modulator is used to apply pressure to the throttle valve. The modulator senses the pressure from the manifold and increases when the engine is under a heavier load.
as far as I understand , it does not have a modulator. e4od are electronic. no vacuum shift modulator
No.