MAC Filtering
Typically this is MAC filtering, which is usually used in Wireless networks.
•What is the physical address (the MAC address) of the NIC (or network adapter) for this connection?
No, end devices cannot have .0 address assigned to them. It loosely refers to the entire network subnet.
MAC address :)
logical address is called as global address and physical address is called as local address .the ip address,which is used by the user in the network is found to be global for use and it is easily identified in any network .physical address is mac address ,which is stored in the nic card,which is mainly used ,when the system is connected in the network using switch
Servers and workstations Êcan share the same subnet ( a network portion of IP address). However, it is recommended you use different subnetsÊwhen there are several network devices.
Your physical address is the MAC (Media Access Control) address that is burned into the network interface card (NIC). That address is unique and is used to find devices within a LAN.
MAC Filtering
The Windows command arp stands for address resolution protocol which simply transforms an IP address to its corresponding physical network address.And 'arp -a' simply lists down the physical network addresses of the network devices connected to the current PC.
The Windows command arp stands for address resolution protocol which simply transforms an IP address to its corresponding physical network address.And 'arp -a' simply lists down the physical network addresses of the network devices connected to the current PC.
There is no physical address.
The MAC address is the physical address. Usually the MAC address is a unique hexadecimal address hard coded into the network card.
•What is the physical address (the MAC address) of the NIC (or network adapter) for this connection?
EPNSA stands for Endpoint Naming Service Address. It is a prefix used in networking to specify the endpoint naming service address that is responsible for resolving network addresses to physical network endpoints. These endpoints can include servers, devices, or applications on a network.
A MAC address is a unique identifier given to network devices when running on a physical network. To find out the MAC address of a network device on a Windows 8 laptop press the key with the Windows symbol on it to bring up the splash screen. Type in CMD and then press enter to bring up the command prompt. Within the command prompt window type in the command 'IPConfig /all'. Check the information on each of the network devices that have been detected and the Physical Address, which is six sets of two hexadecimal characters, will provide the MAC address of the network device.
In information technology, hardware is the physical aspect of computers, telecommunications, and other devices. Hardware is sometimes used as a term collectively describing the physical aspects of telephony and telecommunications network infrastructure.
routers
Yes, all devices on a network must have a unique IP address or you will have an IP conflict and one of the devices will have its network connection disabled.