0
What tool is needed to compress rear brake calipers on a 1997 maxima?
Wiki User
∙ 16y ago
they make a tool for it that you should be able to buy at any parts store, i was able to use a pair of needle-nose pliers, open the pliers and put the tips into the notches on the inside of the caliper piston, turning clockwise will compress the piston.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Are brake pads and calipers the same thing?
NO! Brake Calipers are what compress your Brake Pads on to the rotor which turn simeultaniously with your wheels.
Do you compress front brake calipers the same way as rear calipers on a 2006 ford freestyle?
No need to rotate the front caliper pistons as you compress the front calipers. That process is only for the rear calipers because of the parking brake mechanism.
How do you compress the rear brake calipers on a 1995 Ford Thunderbird?
the piston on the rear calipers will turn in a clockwise motion and that is how they retract.
How do you compress rear calipers on a 1995 Maxima?
If they are the same as a 97 Maxima then you twist them, don't compress them. To compress the piston you do it with a 'Disk Brake Piston Tool'. You can get this at Pep Boys for $12. To compress the piston on the passenger side you turn the piston clockwise. To compress the piston on the driver side you turn the piston counter-clockwise. Be careful trying to turn the piston using pliers or some other tool as you may tear the rubber seal around the piston.
How do you compress rear brake calipers on a 2000 Lincoln Continental?
are u trying to change them?
How do you compress the rear brake calipers on a 2005 Lincoln ls?
The rear brake calipers screw back in. This is because of the park brake. There is a tool that you can either buy or rent from one of the larger parts stores.
How do you compress the front brake calipers on a 2002 Mercury Cougar?
The easiest way is with a "C" clamp.
How do you resolve rear calipers that fire only when the E-brake is applied not when braking on a 1998 MAXIMA?
Have you replaced your rear pads or calipers? May have air in the lines. The reason the E- brake works is because it is engaged by a cable and has nothing to do with the hydraulics of your brake system.
How do you fit rear brake pads on Mazda 6?
The calipers on a Mazda 6 turn inwards you don't push them to compress them.
What size Allen socket needed to remove brake calipers?
9mm
How do you compress the rear calipers on a 2003 Mazda Protege 5?
You can purchase a disc brake tool for compressing the calipers at any auto parts dealer for about $8.00. You will also need to have the brake fluid filler cap off. You can purchase a disc brake tool for compressing the calipers at any auto parts dealer for about $8.00. You will also need to have the brake fluid filler cap off.
How do you compress rear vw beetle calipers?
If the parking brake is connected to these calipers a special tool is required (not expensive) because piston is threaded. Tool available at Sears or auto parts store
