Want this question answered?
manual tranny doesnt have fluid u noob manual tranny doesnt have fluid u noob
A manual tranny does not take tranny fluid. So you can't check it. A manual tranny does not take tranny fluid. So you can't check it.
About five.
manual tranny's take gear oil not tranny fluid. you need to get all that fluid out and fill the tranny with 80/90 weight gear oil
There is a bolt under neath the tranny. take it out and drain the fluid. ATF fluid 2.6 quarts is the capacity of the tranny
Take the bottom pain off
Take out the driveshaft, pull shifter cables off the tranny and unbolt the tranny from the engine , take tranny fluid lines off the tranny and have floor jack under the tranny, take the inspection plate off and take the bolts out of the torque converter that holds it to the flywheel and it's out.
Motorcraft MERCON automatic transmission fluid ( 2.64 pints / 1.25 liters ) is used in the transfer case of a 1997 Mercury Mountaineer
take the bolts out of the tranny fluid pan and drop the pan, change the filter and then put new gasket on the tranny pan and reinstall the pan with the bolts and then refill the tranny with new fluid.
I really doubt that there is a drain plug for the tranny, usually you have to unbolt the tranny fluid pan and take it down to get to the filter and drain the fluid.
Take it to a reputable tranny guy...mine needed a new solenoid pack...about $600
It takes Mopar ATF+4