it has two definitions: # being a sexy and excellent person # being excellent at sex
Definition of 'excellent': The art of being excelled, otherwise known as excellent
FishermenAs well as being excellent sailors and explorers, the vikings were also excellent merchants, as they traded timber for pottery and spices.
The car is being displayed at the NASCAR Hall of Fame.
A buffer amplifier of unity gain is generally used when you need to islolate the source.Connecting a source to an amplifier, can have an affect on the original signal. A buffer amplifier stops the signal being affected by the subsequent amplifier sections. The input to the buffer is matched to the signal impedance.
The turning radius on the Jeep Wrangler are so tight due to the rear and front axles being locked together.
Mathematics is the language of physics. You cannot do well in physics unless you can handle the math. If you are excellent at math, you have a better chance of being very good or excellent in physics, too.
Being very strong and excellent health.
It depends on where the wire is being used, but for the power supply for an ordinary domestic audio amplifier, wire of 0.75 mmsq is adequate, and need to be protected by a 5-amp fuse.
It means being very good at what they do.
Bingo. Good athletes MUST be in excellent physical condition.
The word being sought could be marvelous (excellent, astounding).
* being a bandit * a merry wit * an excellent archer
By being excellent soldiers.
Bridging two amplifier channels is a way of delivering more power to a single speaker. A two channel amplifier might have a power output of 100W per channel. By linking them together, the power output to the single speaker can increase to 200W. It's not always quite that simple. If the amplifier can be bridged, it will say so in the manual and it will show the connections that need to be used. Trying to bridge an amplifier that is unsuitable is a sure fire way of killing the amplifier and perhaps the speaker itself. There are certainly methods that can be used to bridge amplifier channels even if the manufacturer does not offer the facility. To do so needs an intimate knowledge of the electronics used in the amplifier. The fact that this question is being asked indicates that the required knowledge isn't there right now. Much safer to obtain an amplifier that is rated and approved for bridged loads than risk the unpleasant results of getting it wrong.
There is insufficient information in the question to properly answer it. You did not specify what it is that is being removed from the circuit. Please restate the question.
The tunnel diode is a two terminal device that is capable of being used as a small signal amplifier when properly biased.
The peak output value in a double ended differential amplifier is double the peak output value of a single ended differential amplifier for the same input signal because there are two outputs, one being the normal output, and the other being the inverted output. Whatever the normal output does, the inverted output does, but with a reverse sign. As a result, if one output has a value of X, then then other output has a value of -X. If you compare the two outputs, then, the difference between them will be 2X, or double the value.
Yes you can. Contrary to popular belief, an amplifier rated with a higher output than the speaker rating rarely damage the speakers. If the amplifier overdrives the speakers, the sound quality will be dramatically affected. Most listeners will turn the level down to reduce the distortion being heard. The amplifier's power rating is the maximum power that it can produce and it does not mean the output power will be at that level. On the other hand, an amplifier that is overloaded will deliver distorted signals to the speakers. At high power levels, the distortion can be damaging to the speakers in a way that simply over driving a speaker is not. Therefore, it is as safe to use an overpowered amplifier with speakers as it is an amplifier that is rated at the same power or even lower power than the speakers.
Well, mostly the fact that its extremely heavy and not even close to being aero-dynamic.
Priscilla Ahn - In A Tree www.myspace.com/priscillaahn2009 Jeep Wrangler Commercial
Let's take just one example from your question: Physics. If you aren't excellent in math, you don't stand a chance in physics.
A desire to be the best, to never be anything less than excellent, not just because you love competition but because you love your work.
Without being plugged into an amplifier, a solid-body guitar cannot be heard further than 10 or 12 feet. The amplifier makes the guitar electronics sound loud enough to be heard by others . . . sometimes even too loud for others.