answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What would cause the instrument panel lights and the back up light to stop working?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What would cause daytime running lights and check engine light and power windows and instrument gauges and lights to quit working as working?

All of these parts run on electricity, and for all of them to fail would be bad. Bad or burnt wiring could cause them not to work, or a alternator going bad could cause them not to work as well.


Where is the backup light fuse for 2002 Buick century?

There are no fuses for the dash lights. Are your dash lights not working? If not, then you will need the instrument cluster refurbished. I can do this for you, contact me at ANCTechnologies at hotmail


What would cause a lail light not to light but it lights when brakes are pressed?

The bulb could be 'blown'. Remove the working bulb from the other light and try it in the socket of the one that isn't working.


What would cause the instrument panel and dome light not to light up if all fuses are good?

bad interior light dimmer switch or a poor ground. burnt out lights.


What would cause the tail lights and the instrument panel light in a 1997 GM 2500 Sierra Pickup not to work?

A blown fuse. Or a connection problem within the instrument cluster


What would cause some dashboard lights to work but not others?

Replace the light bulbs that are burned out, usually from the back side of the instrument cluster.


Why would your dashboard lights not be working is it a fuse or light bulb?

Is your fuse blown? I have the same problem with my truck. Are any other lights out, or just the instrument panel lights? Often the fuse powers other things. For instance my instrument panel lights are out and so are my running lights. I have found that I have a short somewhere in the wiring. If you replace the fuse and it blows again It is probable that you do as well. I am not sure that the instrument panel is a bulb or not could be analog lights. I am working on the same problem now.AnswerDid you install a radio>? It is a common mistake to use the instrument light wire as a ground. If not, It could be a fuse, the dimmer switch, or the bulb, as a rule, all the lights dont blow at the same time. Some cars use a dimmer module, newer and high end imports especially going back (in my experience to 92 and possibly earlier in imports). RELELNTLESSfuses,dimmer switch,head light moduel,daytime running light sensor,night time running light sensor all been replaced. The dashlights,nor any of the turn signals will come on AT NIGHT?? WHAT WOULD CAUSE THIS/


What would cause a 1992 wrangler to not have working reverse lights?

Did you check the light bulbs? If OK, probably a bad reverse light switch in tranny.


How come your fuse for your instrument lights keeps blowing in your crx?

There can be several things that can cause your instrument panel light fuse to blow. The most common reason is crossed wires that have corroded together.


2004 300M Special instrument cluster lights NOT working NO light tech speed temp fuel lights clock light works fine and dims with control fuse checks ok. Auto manual headlight switch works?

Do you find the solution?


What would cause brake lights to stop working on 1997 intrepid?

Blown fuse, bulb, or bad brake light switch.


What would cause brake lights to stop working on VW Golf?

Check the bulbs, fuse & brake light switch on the pedal.