0
What would cause the left front caliper not to release replaced the caliper and the hose and no improvement 95 S10 Chevy?
Quindionne
If you open the bleeder and it releases pressure, follow the steel line back to see if it is pinched somewhere.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Why is back rotor getting hot with new brakes only on drivers side 2000 Chevy blazer?
Probably has a sticky brake caliper or sticky brake caliper sliders. Who ever replaced the brake pads should have seen that.
Why do caliper bolts back out on a K5 Chevy Blazer 44?
Why do caliper bolts back out on a Chevy K5 Blazer 4*4?
What would cause the left front caliper not to release on 90 GMC Sierra 1500 after replacing?
Replace the rubber brake line (replace both sides, they're not that expensive). The rubber swells shut or collapses or gets filled with junk. Not sure what really happens, but they basically get plugged up. Just went thru this with my dad's 1993 Chevy Silverado. Almost burned up the left hand caliper and rotor. Replaced caliper and things were a little better. Replaced brake hoses and it's perfect now!
Why does the front disc caliper not release on your 1998 Chevy 2500 pickup?
Could be a frozen piston inside the caliper Could be a defective brake hose Could be a damaged (pinched) brake line
Have a 1976 Chevy PU that the brake sticks on the driver side you have replaced the pads and caliper and it still sticks?
You need to change rubber brake line hose from caliper to frame they rot from inside. Thank-You!! That was the problem and now everything is working fine.
Why are mt back brakes squealing Chevy has replaced them and turned the rotors and the are still squealing it has been back to Chevy 5times. They cant seem to fix it. 2007 Chevy Cobalt I deliver mail?
The caliper bolts may need lubricant as the caliper slides across the metal bolts it may squeak. Or overnight brake rotors can rust so when it first moves in the morning it may squeak.
How do you collapse a brake caliper on 98 Chevy silverado?
92 Chevy 1500 truck Front brakes worked good and then yesterday all of a sudden they just locked up and you bleed them they unlock?
The hose to the locked caliper is colapsing internaly and needs to be replaced.
How do you compress caliper on a 1999 Chevy s 10 4x4?
Get a "U-clamp" that fits over the caliper and crank it down.
What size is caliper bolts on 95 Chevy Blazer?
A 3/8" Allen wrench is used to r&r the caliper bolts.
What size bolt is on the caliper of a 2001 Chevy blazer?
It takes a 3/8" allen wrench to r & r that caliper bolt.
Are caliper mounting bolts reverse threaded on 2007 Chevy Impala?
No they are not.
