check the slave cylinder for cluch when cold try pumping cluch pedal 4 or 5 times then hold depressed and try to start cylinder is by passing must activate nut switch
Whats wrong when an 86 ford aerostar keeps trying to start after the engine is running?
which window?, and whats wrong with it?
you can only use diagnostic equipment to turn the alarm off or see whats wrong with it and garages rip you off on the prices they charge ezza1969
After sitting so long, you could have a bad battery, bad plugs, a bad fuse, bad gas, sludge in the carburetor if there is one, clogged injectors. These places are a where to start.
The noise is difficult to diagnose over a forum, but if the battery is charged correctly, and is hissing as you put it, the starter motor may not be working correctly, get a second opinion from a garage
if you meen NO LIGHT in the instrument pannel just check the battery, might be really dead
The spelling, for a start!
Whats wrong when an 86 ford aerostar keeps trying to start after the engine is running?
it depends what is wrong with it....start by figuring that out. It doesnt work. Thats whats wrong with it.
distributor cap
it's broken
it could be your CDI unit its a little box normally with 4-6 wires going to it that's what happened to mine
probably a blown head gasket.
if i sccidently shorted the battery car wont start but cranks whats wrong ??
Your question is unanswerable as it is. What are you trying to ask? There are many things that can be wrong if it does not start, or there could be nothing wrong with it in the first place.
Does it turn over? Does it have spark? Fuel?
The engine will not start. Need a scaner to scan engine, to see whats wrong.