Want this question answered?
From what I can tell they got out of the Automotive business in Hillsdale,MI except for their rubber operation. They closed the Tech Center and two mfg'g plants there. From what I can tell they reduced the size of their Automotive business segment. They were the largest supplier of torsional dampers in the world. I checked with my contacts and they said EP let most of their Automotive technical help go after they came out of chapter 11. Appears EaglePicher dissolved their damper operations in the Hillsdale, MI area and the corporation now and is a much smaller company.
AKA, crank pulley damper, crankshaft damper, torsional damper, or vibration damper.
when the friction plate is pressed by the pressure plate a torsional vibration is developed in order to dampen this vibration torsional springs are provided in the spring plate this springs are also called damper spring.
Moving clockwise starting at the Alternator pulley - over power steering pump - down under compressor pulley - over to torsional damper - around damper to auto tensioner - around auto tensioner - back to alternator pulley.
the center bolt is for the harmonic balancer , aka , vibration damper or torsional damper . the torque specs. i have are 1985 and before 60 ft-lbs , 1986 to 1995 70 ft-lbs , 1996 and later 74 ft-lbs . can't find any specs. for the pulley bolts .
were is the damper on a furance
well they pick grass and put it in the damper and mix it and it becomes damper
Honda calls it a damper. If you want the front damper. Remove the brake hose clamps from the damper remove the damper pinch bolt (on the bottom). Remove the damper fork bolt. then remove the damper by removing the two 10 mm nuts on top. Do not try to Disassemble the Damper without a spring compressor.
damper is a Australian bread.That is a type of food from Australia.
A damper will help to reach the damper without getting burned and keep your hands free of soot.
A thermal actualized damper is a damper that is used in fireplaces and woodstoves that adjust the damper according to the temperature. They are somewhat inconsistant as far as reliability so make sure you research and find a good one.
A top damper or cap damper is a metal spring door placed at the top of the chimney with a long metal chain that allows one to open and close the damper from the fire place.