Want this question answered?
£270 a year
500 USD give or take
under bonnet on right hand side
If installed on the very same vehicle the PSI is the same for both size tires.
The reasonI have never seen left handed threads used on wheel studs ( lugs ) but the reason they are ever used is because the motion of the part is counter clockwise ( mostly ) which may cause the nut to loosen over time from the constant turning in the counter clockwise direction, that is the reason that castlenated nuts with cotter pins are used on wheel spindles and ball joints now to prevent tightening or loosening from motion. answerall heavy trucks have left hand threaded wheel nuts on one side. the reason is, so tightening direction is the same as the forward diection , when vehicle is being driven. this helps avoid loosening wheel nuts. some cars also have left and right hand threaded studs on opposite sidesA 1965 dodge dart 270 had reversed threads on the studs. it was a positive traction rear-end.
270=270, |270|=270, opposite -270.
250 to 270 rwhp depending on miles on the engine and engine wear.
Itshould be listed in your owners manual under maintainence
these nuts
90% of 270= 90% * 270= 0.9 * 270= 243
20% off of 270:= 20% discount applied to 270= 270 - (20% x 270)= 270 - (54)= 216
26% of 270= 26% * 270= 0.26 * 270= 70.2