metal plate on driver door
try going to ebay
Morris 4x4
You can bypss the EGR by putting a bolt in the vaccum line going to the EGR valve blocking the EGR solenoid or alot of people make a plate replacing the valve with a plate but it will set the check engine light its better to just fix it.
Yes no problems, you have to make up a blanking plate to bypass the egr
In most cases, I would say yes-- block off the EGR port with a small steel plate. There are some engines that the EGR design is too integrated, however. Try it, but with caution.
The EGR system recirculates dirty unburnt emission gases back into your engine through the intake manifold which decreases performance, but improves gas mileage. You can bypass the EGR valve. Just buy a block off plate from you local speed shop. However, the EGR valve is there to cool the combustion chamber so without it, you will hear a lot of pinging until the motor melts.
Buy a new one...they are like 20 bucks
CJ7 was released on 03/07/2008.
The Production Budget for CJ7 was $20,000,000.
all tops from 1978 cj7 to 1995 yj fit
basicly, you need something putting in the way between the exhaust pipe and egr valve. there are common "blocker" plate kits available on the internet (check ebay) that include full instructions. if you do block the egr tho, you are liable for a fine as the egr is an emissions related product