0
You can buy a Presser Foot Screw at "IronAway" store
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you attach a vertical needle zipper foot to a Singer sewing machine?
To do this, you must not only take off your regular presser foot, but take of the part directly above it. You must loosen the presser foot screw, and take everything off below it. Then, look for a part on the zipper foot that hooks around a little. Put that where the original presser foot and the "presser foot holder" was. Then tighten the screw. 1=Loosen the presser foot screw. 2=Remove the presser foot and the part that the presser foot snaps in and out of. 3=Find the hook-like part, the same as on the presser foot holder, and put it where the other one originally was. 4=Tighten the presser foot screw. 5=Put the zipper foot down. It should be a little bit higher than touching the sewing machine. 6=To move the zipper foot from left or right, loosen the screw in the back of the presser foot, and slide the foot from side to side! Then tighten the screw again!
What does mean when they say low shank or high shank on a sewing machine?
The shank on a sewing machine is the distance between the bottom of the preser foot and the screw that holds the presser foot in place. This applies to older sewing machines (usually pre-1980), as newer machines have a presser foot that snaps on, as opposed to screws on. --A high shank machine measures approximately 1 1/4" from the presser foot screw to the bottom of the foot, and uses High Shank presser feet --A low shank machine measures approximately 3/4" from the presser foot screw to the bottom of the foot, and uses Low Shank presser feet
What is the function of the presser foot on a sewing machine?
The presser foot grabs the fabric and pulls it through.
What is a presser foot?
The presser foot is the prong shaped piece of metal resting where the needle passes through the garment to be sown.
What is a quarter inch presser foot?
Presser foot is a part of the sewing machine, precicely the part that holds the canvas down when you sew. A quarter-inch foot is a presser foot designed to allow the user to sew seams 1/4" wide
What does the foot do?
The presser foot grabs the fabric and pulls it through.
What is the function of the presser liver for the sewing machine?
The lever lifts the presser foot to remove the fabric after stitching.
What does a presser foot lifter on a sewing machine?
The "presser foot" secures the fabric when it is being sewed and helps feed it through evenly so that the stitches are even and aligned.
What is presser foot used for?
holds the fabric while sewing. :)
What is the use of presser foot lifter?
Complemenation uses of languages such as that
How do you change the presser foot on Kenmore sewing machine 385.17824090?
If you go to managemylife.com and enter your model number,385.17824090, it should take you to a page where you can download the manual for your machine. It should tell you how to change your presser foot.
What are the lower parts of the sewing machine?
the presser foot the balance and the feed fog
