Try looking in either the factory service manual, a Chilton manual or a Haynes manual, they may have a picture or diagram.
Good time to replace all the brake fluid. Remove the brake lines from the Master Cylinder and pump the master cylinder dry. Add fresh brake fluid from an unopened can and bleed the master cylinder. Reinstall the brake lines and then bleed all brake lines until you see clean fluid. Keep adding fluid to the Master Cylinder until you are done.Good time to replace all the brake fluid. Remove the brake lines from the Master Cylinder and pump the master cylinder dry. Add fresh brake fluid from an unopened can and bleed the master cylinder. Reinstall the brake lines and then bleed all brake lines until you see clean fluid. Keep adding fluid to the Master Cylinder until you are done.
The 1999 Dodge intrepid brake lines schematics diagram shows the routing of each brake line. The diagram will show the brake line routing from the master cylinder to each wheel.
Master Brake cylinder replaced and lines bled-how long?
Master cylinder brake lines are the most common brake lines on a the Chevy Malibu.
Drain the brake fluid from the brake master cylinder reservoir. Remove the wiring harness from the brake cylinder. Remove the brake lines. Remove the brake cylinder retaining nuts. Reverse the process to install the new master brake cylinder.
if you syringe and/or soak the oil contaminated brake fluid out of the master cylinder resrvoir with towels, etc then you will be fine, no worries.
Begin by removing the brake lines. Remove the master cylinder retaining bolts. The master cylinder will come off. Reverse the process to install a new master cylinder.
Brake lines run from the master brake cylinder to each wheel, generally under the frame of the car.
A shop in your area should be able to help. If not I could send pics.
The master cylinder.
If your asking about the brake lines in general, they run from the brake master cylinder to each wheel.
Brake lines come out of the master cylinder and go to each wheel.