At a dealership or a harware store. Call the dealership and ask them for the specs on those particular bolts and call around to hardware stores to see if they stock them.
How do I get to the flywheel bolts on a 98 dodge dakota to remove a transmission
remove the cowl & wiper arms (mark location of arms on the windshield). disconnect the battery, Disconnect wire connector at wiper motor & remove the 4 mounting bolts then remove the linkage from motor.
Will a 1992 Dakota truck motor fit into a dodge truck 1999 Dakota?"
The wiper linkage is bad. Or the wiper arm stud bushings (where the arms attach to the cowl) are rotted out.
if its the same size motor it will.
its in the dash youl need to drop the dash and air box and it should be 3 or 4 bolts to remove
No.
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.
10w30
No
inside of motor
One left one Right both attached with three bolts and one stud on top of each motor mount also ties into the front axle on four wheel drive easiest to remove bolts and lift motor away from chassis to remove mounts.