Want this question answered?
The speed of dc shunt motor is practically constant under the normal condition because the field flux is constant.
I have a 93 mirage 140k miles original motor trans clutch everything. Still going strong.
If you are sure that everything is working correctly then check the ground going to the blower motor assembly.............. Which goes through the blower resistor.
There is a Riviera owners club of America. You should talk to them , you're going to need some contacts . They know where to get everything.
Ratings mean Max Value. It means you can provide it with a Max Supply Voltage of 12 Volts. And when supply is 12 V, the shaft or anything connected to it will rotate at a speed of 500 RPM. Going for higher voltages will cause insulation breakdown in the motor winding. Practically though, you can use it till around 16 V, presuming such motors are used for minor works i.e robotics mostly. But this will decrease the lifetime of the motor. Going beyond that is destructive for the motor.
yes, but you have to do some fabrications to the motor mounts.
You could practically ask any Jet ski Motor specialist for help.
It is going under the bridge.
Because the field flux is constant.
A; stepper motor can rotate to various angle if the resolution is infinite then the rotation will be infinite. however practically is set to step a certain angle per step
It makes work easier than doing everything by hand without the motor.
The blower motor is going bad and drawing too much current.The blower motor is going bad and drawing too much current.