At the master cylinder, driver's side, under hood, next to firewall. If you have to add fluid then you have a leak or your brake pads are worn.
where do I add brake fluid to my Honda accord 92
The one on top or near the master cylinder. On the cap is written the type brake fluid to use.
4
Look at the master cylinder on the driver's side next to the firewall. Only add fluid if it is at the add or low mark. Only add the exact fluid as listed on the cap. If it is low, you either have a leak or your brake pads are worn.
At the master cylinder brake fluid reservoir located driver's side next to the firewall on top of the master cylinder. Use DOT 3 fluid.
in the brake fluid resoviour under the hood if you have a standard it will be the bigger one the other one is the clutch fluid in the brake fluid resoviour under the hood if you have a standard it will be the bigger one the other one is the clutch fluid
where do you add the transmission fluid in a 1996 Honda accord 4 cylinderAnswerwhere do you add the transmission fluid in a 1996 Honda accord 4 cylinder
To refill the brake fluid for a 1992 Acura, you need to remove the cap on the brake fluid reservoir. Add fluid until the dipstick measures full, or the line on the reservoir that says 'full' is touched by the brake fluid.
dot 3. nothing fancy always add brake fluid from a sealed container. It absorbs moisture.
If you mean where to add brake fluid, it would be in the brake master cylinder, usually located on the driver's side, near the firewall. You should be able to see a round plastic reservoir with a gray cap ... unscrew to add brake fluid.
Try checking the brake fluid. that's what happened to me as well. the light on the dash wouldn't go off. all I did was add brake fluid then took the e-brake off and off went the light. I have a 90' accord but I think 90-93 is basically the same.
Good question. At the brake fluid resovoir