0
There could be anywhere from 2 to 6 depending on the model of the mower.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Belt diagram for a 46 inch tri cut noma lawn mower?
Belt diagram for brings&straton noma 46" deck
Does anyone have a diagram on how to route the belts on a 46 Sears mower deck Model number of mower is 917 249740 .?
917.249740 is not the mower's model number. It is the model # for your grass catcher assembly.
Belt size for yard machine riding mower 20 hp 46 in cut?
what size is the belt for a 46 in cut deck belt with 6 pulley's.
How does one adjust the tension of the mower drive belt on a john deere 260 with a 46-inch deck?
Its all spring loaded. No adjustments needed.
Were can you find a service manual for a craftsman 46 cut 18.5 hp kohler engine?
Check out http://www.managemyhome.com; they have manuals for almost all appliances and other things you need around the house. I found the manual for my Craftsman mower here. Good luck.
What is the belt diagram for 46 inch Murray 18.5 horsepower garden tractor?
The diagram should be on a label on the deck or on the rear of the mower. If it is gone, then your local mower repair shop can probably print you one out for a small fee.
How do you align blades on a 46 inch mower deck?
Without knowing the exact mower you are working on, I will give you the most common answer. If the blades are belt driven you do not have to align them. They are positioned so that they will not contact each other and will overlap in their cut pattern.
What attachments are available for the John Deere 240 Tractor?
The attachments for a John Deere 240 tractor are a 38" mower deck, 46" mower deck, blade and a 42" snow blower. You can find a complete listing of these attachments here: http://www.tractordata.com/lawn-tractors/000/0/2/26-john-deere-240-attachments.html
Can you use a 46 inch MTD mower deck to replace a 42 inch mower deck on a craftman mower?
Hi, Chute or lower half of chute will have to be changed(depends on one or two piece chute on machine.) Rest will bolt up - frame the same. Peace, crigby
What size primary belt for ranch king pro 22HP 46 inch?
Ranch King is a brand name of the manufacturer MTD. Product manuals with part blow-up diagrams are available from MTD's web site, http://www.mtdproducts.com/ Models are identified from the model number printed on a label under the mower seat. Parts can be ordered directly from MTD or other distributors on the web. It is my experience that original brand name MTD belts work best. The 22HP, 46" mower deck Ranch King Pro has 3 belts: The drive belt which runs from the engine pulley back to the hydro drive unit to provide over-the-ground propulsion is part #754-0349. A mower has either an electric PTO or a manual PTO, not both. The electric PTO belt the provides power to the blade deck (runs around the electric clutch on the engine shaft (activated by electric switch, not the mechanical hand lever that engages the mower deck) is p/n 754-0476 for the 46" deck. The manual PTO belt the provides power to the blade deck (runs off the pulley on the engine shaft (activated the mechanical hand lever to the left of the steering wheel that engages the mower deck) is p/n 754-0228 for the 46" deck. The deck belt that goes around the 3 blade spindle assemblies on the mower deck, to drive the grass cutting blades is p/n 754-0349 In my experience, the PTO belt lasts about half a season, the other belts break about every other season when mowing 4 acres weekly.
What size belt is used on an ariens 46 mower?
On a Arien's mower you will use 46 inch belt. This is an older type lawn mower.
Does anyone have a picture or diagram on how to put on a deck belt on a white MTD 46 riding mower?
Hi, Top(engine to deck) or bottom(blade to blade.) Manuals are available from MTD Products online for free. Model and serial numbers under seat. Peace, crigby
