It depends on what year S10 you have.
same place as any other vehicle on the column ur just at it's base
autozone.com
you can find the switch on the back of the brake pedal.
The buzzer that lets you know the key is in the ignition in a 1989 Chevy Blazer is in the steering column. To access it you would need to remove the steering wheel with a special tool, or remove the ignition assembly. The key makes contact with a tab that activates the buzzer.
Owners manual, positive.
On top beside the intake on passenger side of vehical... You can trace coil wire from distributor to find
The 1991 Blazer has a current draw causing the wire to burn. You will need to trace the wiring out to find what is drawing too much current.
where can i buy a transmission dip stick for a 1995 chevy blazer
how do u disconnect the cable from the back how do you remove the ignition switch from a 2001 Chevy Malibu you have to put the old key in the ignition. then if you feel around on the bottom of the assembly you will find a small almost rectangular button. depress this and then proceed to turn the ignition clockwise. this will move it to the right position and if everything works correctly it will just slide out.
You can find ignition coil for a 2001 Blazer on http://www.made-in-china.com/products-search/hot-china-products/Ignition_Coil.html
I hav just purchased a 58 Chevy apache and are having the same problem. I did find a site that displays a complete diagraham for the entire ststem includingthe ignition switch. The site is http://www.classicchevytrucks.20m.com/cgi-binwiring.jpg Good luck with the changeover wspringerjr@yahoo.com
There is no headlight relays for this year, I have the same vehicle and I was pissed to find out its hard wired directly through the headlight switch itself.