I have the original, black and white copy, in Japanese. I will email it to you if you would like. pboc.tw@gmail.com.
Tom
The wiring harness from the 1999 stereo has a 21 prong plug and the 1995 has a 14 prong plug you can purshase a harness from Honda but it has to be hadrwired to the exsisting wiring but don't screw it up, go to Honda and get a wiring diagram for the both of them to match up the wiring you need to make it work.
You can buy a speaker harness. An adapter that connect the positive and negative from the speaker into the stock harness.
chang the wiring harness inside car.
The C115 connection is it supposed to connected because mine is not
yes, but you will have to buy mounts, transmission, linkage, axles, ecu and front spindles, you will have to change your wiring harness and go backwards to an obd1 harness, or use a jumper harness.
You need a diagram of the wiring harness, such as can be found in motorcycle maintenance manuals. The description of the full procedure would take many pages to answer and would be useless anyhow, because the answer depends on the degree to which the particular wiring harness has been dismantled.
The VSS is located on the top of the transmission and is connected to the engine wiring harness. To replace it all you need to do is unplug the old one from the wiring harness and unscrew it from the transmission, instalation is the reverse of removal.
I'm not certain that the vehicle came factory-equipped with a trailer wiring harness. HOWEVER - if it does exist look CAREFULLY underneath the rear of the CR-V for the wiring to be tucked up and into the rear area somewhere, perhaps underneath the rear bumper housing.
if factory wal mart sells wire harness and it does some after market serios
It is located on the top of the transmission, you can access it without removing the transmission as it is connected to the engine wiring harness.
It is located directly above the transmission. There is a detachable wire harness.
Visit auto parts store and order Hoppy 43105 harness. Remove interiorrear panel just above bumper and interior driver side rear quarter panel (where the jack storage is). You will find an unused wiring harness that is taped out of the way. Use this to connect it to the harness and route the wiring into the jack storage area.