answersLogoWhite
Crankcases and PCV Valves
Chevy Silverado
Kia Sephia

Where is PCV valve on 1996 Kia Sephia?

757677

Top Answer
User Avatar
Wiki User
Answered 2009-02-12 22:58:53

1. http://Kia.com/index.php

2. (lower left side) hover "Kia Owners" >> click "Service Information"

3. Create Login (worth it!!!!!!!)

4. Technical Information

This is a HUGE online repair manual. I was very impressed, overlooking some translation errors.

the only hose tunning to the valve cover typically on the passengers side

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


where is the pcv valve on a 2003 kia sorento


The PCV valve on the 2004 Kia Sorrento is on the drivers side rear of the engine. It is just under the ICV.


On a 1996 Chevy Camaro, the PCV valve is located on the right side of the valve cover. There is a hose that runs from the PCV valve and connects to the back of the intake manifold.


On a 1996 Ford Ranger , 4.0 : The PCV valve is on top of the drivers side engine valve cover , near the rear of the valve cover


most all pcv valves are located on the valve cover


i DONT KNOW WHERE BUT I AM TOLD IT IS LOCATED INSIDE THE VALVE COVER


The PCV valve on a 1996 Ford Escort 1.9L is located between the engine and the radiator. It is near the vacuum hose.



PCV valve is on top of one of your valve covers and it should just pull out there should be a big rubber line on it


The PCV valve for your 1996 Ford Explorer - 5.0 L - V8 engine is at the back of the intake manifold - according to my Haynes repair manual


On the left side behind the engine


The PCV valve on any Kia with the 1.8 liter DOHC 4 cylinder(Sephia or Spectra) is located in the aluminum valve cover on top of the engine, on the passenger side and facing the firewall. There is a 3/8" i.d. neoprene hose about 5" long connecting the valve to the intake manifold, with a "squeeze type" hose clamp on each end of the hose. Simply squeeze the clamps with a pair of pliers and move them toward the center of the hose, then work the hose off the fitting on the intake manifold and PCV valve. The valve will probably pull out of the engine valve cover along with the hose. Place the new valve in the valve cover, then reattach the hose and move the clamps back to their original position with pliers. CAUTION: The old hose, if it hasn't been replaced before, will be hard and brittle, and may break. Just get a 6" piece of 3/8" neoprene fuel hose at your parts store, cut it to length, and install it on the PCV valve and manifold fitting with the old clamps. You're done!


where dose a pcv valve go no 1996 buick lasaber...


Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.


It is located on the side of the valve cover on the side where the battery is. It screws in and is a dealer only part.


Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.


The PCV valve is located in the top driver side of the engine, right by the intake manifold. The PCV valve is located in the rear valve cover, just behind the throttle body. There's a rubber hose connected to it. To remove it, just pull it out of the valve cover.


On top of the valve cover on the passenger side


On top of the valve cover , near the rear of the cover


It is in a hose that is stuck in the top of the drivers side valve cover.


the pcv valve is connected to the end of a breather pipe that is just above the fuel injectors and is plugged into the side of the rocker cover/valve cover. however mine is a 1998, so not sure they will be the same.


Where is the PCV valve located on a 4 cyl ford contour and will this if replaced will let my service engine light go off?


on the back of the engine under the EGR valve and the hose can easily be traced from the pass side of the intake mannifold back to the pcv


Generally you will find a PCV valve somewhere on one of the valve covers, with a hose the connects to it.


Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.