From what I have learned Sensor B is just a code that is being transmitted to the computer. There are several different codes that the crankshaft sensor will send depending on what is going wrong with the car. There should only be one crankshaft sensor on the vehicle.
To reach the sensor, you need to jack the car up. With a 15mm or 17mm (forget which), you need to remove 2 starter bolts and move the starter out of the way. Behind and above the starter you will find the sensor. A 10mm bolt holds it. Fairly easy to do, took about an hour in the dark at 0F. Brrrrr
The engine won't start.
depending on the year, I have a 2002 intrigue, it is located just above the starter, it needs to be removed to remove the crankshaft sensor, 15mm for starter and 10mm for sensor 1 bolt , not to difficult.
The crankshaft sensor is in the front of the engine.Above the starter.You will have to drop the starter.2 15mm bolts.Look up and there it will be.
looks like a normal sensor, I have a 2002 intrigue, it is located just above the starter, you have to take out the starter in order to take it out.
where is the crank sensor located on a 2002 Oldsmobile intrigue 3.5
where is the camshaft position sensor located on a 1999 Oldsmobile intrigue
Is this a 3.5L Intrigue V6 engine? If so, it should be behind the left exhaust manifold. You will need to remove the starter to gain access.
Right next to and somewhat behind the crankshaft pulley
in front of the converter
It is located above the starter. you must remove the starter for access. Make sure you disconnect the battery first.
where is the crankshaft sensor located on a 1988 cutlass supreme
On front cover of engine by crankshaft pulley.