The PCV valve is located on the backside valve cover, its towards the drivers side of the valve cover, tough to get at not much room, just changed mine.
where is the freeze plug located on a 1992 Chevy beretta and I need a picture on it also
typically in the valve cover.
Passinger side valve cover.
The PCV valve on a 1992 Chevy 1500 350 is located on the intake manifold which is on the passenger side of the vehicle and to the right of the throttle. It has two bolts that hold it in place.
under the master cylinder.
depends on engine, mounting, body, ecm, and about a million other things, but possibily
the pcv is located under the fuel injection plenum, towards the back of the engine as opposed to some newer models that have this valve located in the front of the engine on the valve cover
follow the link for your wiring codes
SIGN UP FOR ALLDATA.COM TO BE SURE. IT IS SO WORTH YOUR TIME AND TROUBLE. T HEMPLE there is no egr valve in a 1992, the manual says so
Assuming it's the ever-common 3.1 liter V6, it should be on the front of the block between the radiator and the block.
Start with the lack of freon.
It is located in the fuel tank.
it is located on the passenger side valve cover
No there is not.
its on the back of the valve cover.
it is on the side almost at the bottom of the radiator..very hard to get too !!!!
if its burnt out, replace it, if not, check the wireing
That year model did not have a modulator valve on the transmission.
Yes it does... i have a 96 beretta, and it did not come standard in the model. you have to buy the belt for the blower. go to your local advance auto store and they will easily help you
In the middle of the valve cover nearest the firewall.
1992 Chevy trucks did not have a CAM SENSOR. They had a distributor.
The plenum is the upper part of the intake manifold.
I believe the ECU should be mounted above and behind the glove box
It has 1 O2 sensor on the exhaust manifold behind the engine