The answer below is NOT true. There IS a PCV valve on all Bonnevilles. It is mounted in the intake manifold. Obviously there would not be a replacement being made for vehicles if it didnt exist!!!! Look on the left hand side of the intake manifold. It will have a sensor mounted to the top of the housing that fits the PCV valve. Remove this sensor and underneath the PCV valve will be sitting. Pull it out with some needle nose pliers and be sure to keep the o ring that is wrapped around the old one if you did not receive on with your new one. =)
Answerthere isn't one evern though all the books at parts stores show that you need PVC vavle 299 or something like that the 3.8 liters don't have one they use a diffrent source of cranckshaft ventilationThe fuel pump is located inside the fuel tank.
locate blend door actuator for 1997 pontiac bonneville se
Probably in the 1997 Pontiac trans-am heater core valve holder. If not, you probably lost it. Both the valve, and your mind.
your back end
The rotor thickness for your 1997 Pontiac Bonneville is 0.75. When the rotor falls below this thickness a certified mechanic can no longer use the rotor.
A person can find a wiring diagram for a 1997 Pontiac Bonneville at most GM dealerships. The dealerships are happy to help customers with any requests.
The Autolite website lists a gap size of .060 the 1997 Pontiac Bonneville.
go to www.kellybluebook.com and it will tell you the value
http://www.autorepairmanuals.biz/
It is located on the throttle body. Look for your airfilter box(big black one near drivers side headlight) follow the hose to the throttle body, you will see 3 electrical connectors. The IAC valve is round and black.
The 1997 Pontiac Bonneville has a coolant capacity of 5.6 gallons. The manufacturer recommends that 50 percent of your coolant should be anti-freeze.
The blower motor on a 1997 Pontiac Bonneville is located next the evaporator core. It will be mounted behind the glovebox on the passenger side of the vehicle. Remove the glovebox, mounting hardware, and sensor clips. The blower motor will be able to be replaced.