On 3.0L and 4.0L engines, the PCV valve is mounted in the valve cover near the brake booster. - Haynes Repair Manual #36071 - 1993-2005 Ford Ranger Pickups.
Hey Vince==It is in the valve cover. GoodluckJoe
The 1995 Ford Ranger 3.0 liter engine PCV valve can be found on the top of the engine. The PCV valve will be on the back side of the air cleaner.
The PCV valve, on your Ford Ranger 2.5 liter engine, is located on the outside of the air cleaner housing. The valve is on the back of the housing.
where is the valve located on the 2002 ranger 4.0 liter 6 cyl?
Yes, it does have an EGR valve.
On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.
Only if you have the 2.5 liter four cylinder engine in a 2001 Ford Ranger . ( that engine has a timing BELT )
You could have the 2.9 liter , the 3.0 liter " Vulcan " or the 4.0 liter V6 engine . They are all over head valve / pushrod designs in a 1992 Ford Ranger
The 2.3 liter in the Ford Ranger from 1989 to 1997 and the 2.5 liter from 1998 to 2001 use ( 8 ) spark plugs
Vents crankcase via carb vac. Typically valve cover/similar. Check your vac hoses & that should help you locate.
I believe it is on the valve cover , drivers side of engine , towards the rear
I was looking on fordparts.com at the 2004 Ford Ranger with the 3.0 liter V6 engine and it doesn't list an EGR valve for the 3.0 liter like it does for the 4.0 or 2.3 liter
The Ford 4.0 liter V6 engine has ( 6 spark plugs )
In a 2001 Ford Ranger : The SuperCab body style holds ( 19.5 U.S. gallons )
A 2001 Ford F-150 could have a V6 or V8 engine A 2001 Ford Ranger XLT could have a 4 cylinder or the 3.0 or 4.0 liter V6 engine
On a 2001 Ford Ranger : The 4.0 liter Single Over Head Cam , V6 engine has ( 3 ) timing CHAINS
In the top of the valve cover , on the drivers side of the engine , near the rear of the valve cover , next to the firewall
On your 1989 Ford Ranger : The vacuum modulator valve is on the passenger side of the A4LD automatic transmission ( it might be behind a heat shield )
On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : The PCV valve is on top of the drivers side engine valve cover It is near the rear of the valve cover ( towards the firewall end )
As far as I know the 2.3 liter DOHC engine in a 2008 Ford Ranger has a timing CHAIN
.042 - .046 inch
I don't know if your Ranger is the same but on the 2001 Ford Explorer the 4X4 module is located behind the right front passenger kick panel
( 8 spark plugs ) for your 2001 Ford Ranger 2.5 liter 4 cylinder ( with Fords twin plug ignition system )
On a 1998 Ford Ranger : Both the 4.0 liter and the 3.0 liter V6 engines are an ( Over Head Valve ) design
on the engine valve cover , drivers side , towards rear of cover , near firewall