Want this question answered?
To reset the ABS light on a 1994 Acura Legend Coupe you will first need to find the fuse or relay box under the vehicle's hood. Remove the 3 15 amp fuses located in this box. Replace the fuses after approximately 30 to 60 seconds. This will reset the ABS light.
The 1995 Chevrolet Blazer ABS relay switch is located on the firewall in the engine compartment. The relay switch will be on the passenger side of the firewall.
as long as its not an RS or Type R.
you need a special tool called a t wrench
There should be a fuse and relay legend in the drivers manual.
I believe that is in the relay box , in the engine compartment , BETWEEN the battery and the drivers side fender . The ( 2 ) larger relays are the ABS pump relay and the ABS main relay ( NOT the power distribution box / it's called relay module # 3 )
On a 1995 300zx N/A Coupe it is located behind the passenger seat under the plastic cover where the ABS assembly is. It is in a black box on top of the ABS unit under the black cover. There are two relays one has a raised tang on it that is the abs motor relay the other is the solenoid relay. Should be the same for 1990 to 1995 and maybe more and TT should be the same, do not know where the 2+2 relay is.
the abs modulator has a proportioning valve inside for normal braking.its an internal leak
the relay is in the abs pump
The "main relay" is inside the abs computer. If you have the Main Relay code, the abs computer has failed.
Factory ABS has certain time to be serviceable. Once it's past due, when the abs lit comes up, it needs to be brought to servicing department to check for integrity. The reason for ABS light on is the ABS system is bad. The most common issue of Honda/Acura ABS is the Nitrogen tank lost the pressure. The solution is to replace the whole unit (Not computer control).
The Mazda ABS relay switch is located on the firewall in the engine compartment. The ABS relay switch will be on the passenger side of the firewall.