The wire you need is a "Alarm Input Wire", this will probably be linked with your Dome Light, or Courtesy Light. Run the wire from your Door Pin, which is Dark Blue, and it's a ground (-). It's located at the 23 Pin Black Conn. behind your Drivers Side Kick Panel. Dark Blue (-) or White (-) At Headlight Switch can also be used for door trigger. 96' Lumina.
The spot to connect the remote starter parking light to the brake wiring in a 2002 Kia Sedona is just above the brake pedal.
If you have a remote that locks & unlocks your antitheft system it could be as simple as resetting your remote, I had a similar experience.
To begin with, check the box or manual of the remote car starter to see if the product is compatible with your car. Use a soldering iron to connect wires following the manual. If there is more than one wire for ignition, accessory or the starter, use a relay to connect them.
What does a remote starter have to do with the wipers? Just turn them off when stopping the car, and then when you use the remote starter, the next time, the wipers will not come on. If the wipers are not on then they will not work, no matter if you are using a remote starter or not.
The key remote? or the actual starter its self like valet starter..
To disconnect a remote starter you will have to remove the dashboard panel around the car's steering column. Look for the remote starter. Disconnect the wire at the starter that goes to the positive battery terminal. Put the dashboard panel back on.
All factory Dodge systems are reset with the remote or by unlocking the drivers door with the key.
There is no battery in the starter.
How do i program my remote car starter / lawless remote
No.
no
Try Remotes Unlimited. I just ordered a remote from them today for an Xtreme starter. I just googled the number on the back of the remote and their website came up.