answersLogoWhite
Dodge Durango
GMC Sierra
Ford F-150
Ford F-250

Where is the blue wire located to install a brake control on a 2006 GMC Sierra 1500 model?


Top Answer
User Avatar
Wiki User
2011-09-13 10:33:51
2011-09-13 10:33:51

There is a factory style plug available that either came with the truck or is available through the aftermarket. It plugs into the factory panel that is located on the firewall by the driver's left foot. The plug will have wires attached to it that are for the brake control. The only other thing that will be required is a 40 amp PAL fuse for the underhood power distribution panel. If you are using a factory harness it will have the fuse taped to it. If you are using an aftermarket one, you will have to supply your own fuse.The factory harness has 5 wires and are different colors than the brake control. One of these wires is for an illumination circuit that most brake controls do not have. The aftermarket harness should only have four wires and they are usually the same as most brake controls (red, white, black and blue). Just make your connections, plug it in and away you go!

Related Questions

User Avatar

The 1996 GMC Sierra DRL module is located underneath the dash panel on the driverside between the pakingy brake pedal and the brake pedal.

User Avatar

yes, it's located at the top of the brake pedal

User Avatar

check with the dealership there was a recall to replace the switch for free! I had mine replaced...tombo

User Avatar

To install new brake pads on this truck, you will need several items. You will need blocks for the tires, a jack, a lug wrench, a socket set, jack stands, and some grease.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.