If you look over by the right fender apron under the hood, back on the firewall, there three large square connectors with 10mm bolt heads in the middle of each connector. Those are the PCM wiring bulkhead connectors. That is the end of the PCM sticking through the firewall from the inside of the vehicle.
I have a 2001 Ford Explorer sport trac and the module is located behind the front passengers side panel. I would have to believe that the 2002 Explorer would be the same.
The powertrain control module (PCM) is visible from the engine compartment on the firewall on the passenger side. The RAP module for your keyless entry should be in the jack storage compartment (at least it is on the 4 door)
One end of the powertrain control module is visible from your engine compartment.It passes through the firewall on your passenger side. The rest of the PCM module is "hidden" under your dash behind your glove compartment.
behind the glove box
The computer module on the 2002 Explorer Sport is not located in the drivers side rear panel, does anyone know where it is located? On a 2002 Explorer Sport if you are looking for your code or computer then you will have to disconnect the battery and the passenger side airbag cover pull it off and gently remove the airbag by sliding it be careful not to deploy it and there will be the computer directly in front of you the 5 yellow numbers are your key code and this is how you also access the computer, I have a2001 Explorer sport and this is where I found it. Which computer are you looking for? On the 1998 Explorer Sport? The Engine Control Module (ECM) or the Chassis Control Module (CCM) or the Airbag Module (Clock Spring)The answer that the Computer Control Module is under the Steering Column Airbag is the funniest thing I have ever heard. That is the Clock Spring. There is a module under the glove box on the kick panel on the Passenger Side of the 1998 Explorer Sport, behind that plastic molding you see just inside the door on the right-hand floor. It has a plastic clip that holds it in, just reach up to the top of it and tug it out. Be careful, no need to break it but it will come out. In some models it is located behind a metal bracket that holds it in and will need to be unbolted. As with any computer module, Match your S/N with the one you replace it with. We need to know which module is under the plastic cover on the passenger sidewall.
The security module on 2002 Ford Explorer is on the passenger side, second row behind the seat belt panel.
The door locks are not computer controlled.
where is the 4x4 fuse located in a 2002 ford explorer.
The 4x4 control module is located behind the kick panel in the passenger side floor board. The module simply unplugs and you plug the new one in.
just take the fuse out, that's what i did to mine,wont hurt nothing..........
The front control module is the computer that is bolted to the front of the under hood fuse box.The front control module is the computer that is bolted to the front of the under hood fuse box.
The 2002 Acura airbag control module is located on the firewall in the engine compartment. The airbag control module will be on the drivers side of the firewall.
I'm still looking to comfirm this further, but so far have established that the computer module is located behind the kick panel on the passenger side. Door lock code is supposed to be in bold type (5 digits)
where is the gem module located on a 2002 ford f 250
AnswerThe powertrain control module is visible from the enginecompartment, it is in the firewall on the passenger side.The RAP module for your keyless entry should be in the jack storagecompartment (at least it is on the 4 door)The powertrain control module is also located behind the passenger side airbag compartment on new models 2000 and up and the 5 yellow numbers on it is also your keyless entry they will not be in the jack compartment on 2000 and up
no and no
The shift solenoid on a 2002 explorer transfer case is located on the drivers side.
According to my Haynes repair manual 2001 and later models have a separate control module just for the 4X4 system that is located behind the right front passenger kick panel.
It has an engine computer (PCM)
the module is to the right of the gas peddle,bolted to the floor.
that module is located behind the rear bumper on drivers side
The air bag module on a 2002 Saturn L330 is located under the center floor console. The sensors are also located under the center console.
It is located on the floor below dash cupsholders.
It is located at the chassis under the driver side.