Under the glove box, there is a panel, I think you need a 7mm socket. Remove the panel and there it is.
95 Grand Cherokee ECM is located on the engine compartment firewall, passenger side, behind white plastic radiator overflow tank.
yesyes
when you open the hood of your 1991 Jeep cherokee, look at the right side fender( drivers side) you will see a black box mounted to the fender well behing and next to the air box,. that is the Electronic Control Module ( ECM). I hope this helps.
a 1995 grand Cherokee is obd 1 compliant, The diagnostic connecter is under the hood. It is a black square connector.
No CCD/bus messages received form ECM.
The engine control module is required for the engine to operate and can not be bypassed.
no
In fuse box under hood
Ecm is located behind instrument panel. Havent got it out yet looks to be fun
left side near the steering column
unplug the 12v batt for at least 30's
Under the dash, left side you will have to remove the close out panel.
the ecm for a 1998 grand prix is in the air intake box. it is pretty simple to get out, take a look if you need more help e-mail me chexmix_83@msn.com
No, it is hardwired into the ecm and the rest of the car.
Under hood, passenger side, and under coolant reservoir
Where did u get your new ECM? You probably need to have it " flashed" @ a gm service dept. Or a shop with tec2 scanner
Idle is controlled by the ECM (computer). Not adjustable. check sensors
It is called a PCM. and it is located in the bottom of the air filter box.