answersLogoWhite
Plymouth Laser
Mitsubishi Galant
Nissan 240SX
Honda Prelude SI

Where is the ecu on a 1991 Nissan 240sx?


Top Answer
User Avatar
Wiki User
Answered 2007-11-26 06:04:41

behind the plastic in the passenger side foot space on the right (behind the light) there are 3 screws holding the plastic on

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


Yes the ecu will work. First disconnect the battery and connect the new one then reconnect the batter. Start up the 240sx and it should work it not it needs to be diagnoste goggle 1990 240sx ECU CODES FOLLOW THE STEPS AND THAT SHOULD WORK I know cause I'm using a 1992 ECU FROM Nissan Stanza. I was told it's alittle advanced on the horse power side and idle moves quicker.


no. must be the same. you may be able to get away with OBD0 (zero)


you push the reset button on the back of the ECU.



ask the mechanic from the Nissan company


Yes they will, both are the s13 model and virtually everything on s13s is interchangeable.



what makes a 1991 Nissan 240sx stop while you drive. and it is not out of gas or oil. Could it be the ignition module


NO, to pass smog test, it all needs to be original


Yup. you must transfer the whole wiring harness and the ecu though, the job is easy and straight forward, everything is plug and play




The Nissan 240SX was brought to America in 1989.


yes it will and its about the best thing you could do to a 240Sx.


take out the halfshafts pull the motor and unbolt the tranny


Normally it is behind the brake pad...feel around there it should be there.


Yes it is, the Nissan 240SX was assembled in Japan and brought to America in 1989.


Driver window is out of alignment on a 95 Nissan 240sx? what do i do


The Electronic Control Unit (ECU) is located in the Right Front kick panel inside the car pull out the kick panel to get to it


1-3-4-2 Distributor turns counter clockwise.


1990 is ka24e, single overhead cam, 1991 is ka24de, dual overhead cam.


yes any model of 240sx will be able to fit a sr20det as long as the harness is spliced to the old one of the stock ka. yes any model of 240sx will be able to fit a sr20det as long as the harness is spliced to the old one of the stock ka.


Yes the 240sx Is back wheel drive, but its called RWD or rear wheel drive. Meaning the rear tires move the veheical


Wat are the tps volt settings for a 1992 Nissan 240sx


nissan 240sx. it turns over but wont start



Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.