answersLogoWhite

0


Best Answer

up against the firewall mounted to the cylinder head, on my 98 it sits at an angle above cylinder #4, has metal pipe that goes to the intake manifold.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where is the egr valve on a 98 s-10 4 cylinder?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Your 98 Chevy s10 fails smog test have replaced everything but egr valve and oxygen sensor what else can you do?

A faulty EGR valve can cause a 98 Chevy to fail a smog test. The oxygen sensors should also be tested as they can also cause a 98 Chevy to fail a smog test.


Where is the EGR valve on a 1999 Isuzu Rodeo?

erg or egr? egr valve is located in the back top of the engine slightly to the left if your looking under the hood. it looks like a cylinder...thats the way it is in my 98 anyhow It is to the rear of the motor on left. Cylinder shaped with wires coming out of the top. 2 bolts hold it in place.


How to replace egr valve in 98 dodge 1500?

A 1998 Dodge Ram does not have EGR.


What is 401 acura code on 98 2.5 tl?

That's your EGR valve flow is insufficient. Replace the EGR valve.


How to fix the egr system in 98 Honda accord ex 98?

take the EGR valve off and spray carb cleaner in the egr valve and in the port. This will some times work as it gets plugged up


Where is the PCV valve on a 98 s10?

There is no PCV valve on the 2.2 Liter engine.


How do you clean EGR valve on a 98 V6 3.8L Olds Intrigue?

After removing an EGR valve from the vehicle, the valve can be flushed with carburetor cleaner. If the valve still sticks then a replacement will be needed.


98 Honda Prelude error code P1491?

Code P1491 Means: EGR Valve Lift Insufficient Detected EGR Valve needs to be replaced


Where is the egr valve position sensor on 98 mazda protege?

It's bolted right on top of the egr valve which is on the back of the engine under the throttle body there will be a small vacuum line going into where the egr valve bolts into the intake


How do you replace Vacuum Switching Valve on 98 Camry?

Its under the EGR on the block ya. follow a hose from egr to vsv from underside of car


Will the motor from a 99 Saturn fit a 98 Saturn?

It should. Look at the EGR valve; it's on the drivers side of the head. If the EGR valve is the same, everything else should be easy to exchange.


How do you replace egr valve on Toyota Rav4?

On a 98 rav4 you disconnect the two rubber hoses one on top and one on the side, you then remove the 12 mm nuts that bolt the valve to the intake manifold, then you remove the 10 mm screws from the bottom of the valve that goes to the cylinder head.