It is on the front of the transmission, next to the cooler hoses.
It is on the front of the transmission, next to the cooler hoses.
It is on the front of the transmission, next to the cooler hoses.
The only speed sensor on the engine is inside the distributor.
It is a sensor on the transmission that reads the rotational speed of the input shaft.It is a sensor on the transmission that reads the rotational speed of the input shaft.
yes the have a speed sensor a input and out put the input allow your transmission to change gears and the output speed sensor allow your speed to register on your speed domitor
The input and output speed sensors are located on the front of the trans. They have two wires and the input sensor is closer to the engine.
Speed sensors are not user serviceable parts. The sensor needs to be replaced, and is usually either screwed in or bolted on making the replacement easy.
The transmission computer uses it to know the rotating speed of the input shaft.
It is on the front of the transmission, between the cooler hoses.
There are two sensors located on the driver's side of the transmission. there is an input and and output sensor. You can get to them from the underside of the car.
is on the transmission It is the two wire sensor on the same side as the cooler hoses, closest to the engine.
IF the speedo does not work that means is not getting a signal from the output sensor. Also delayed and erratic and mushy are controlled by the input sensor speed battery level must be correct/ idle speed all this is to the battery of sensors opening and closing at proper perspective intervals.
It does not use an input speed sensor.
There isn't an input speed sensor.