answersLogoWhite
Asian Cars
Honda Civic
2000-2005 Dodge & Plymouth Neons
Ford F-250

Where is the intake air temp sensor on a 1990 Honda civic dx 1.5 liter?

131415

Top Answer
User Avatar
Wiki User
Answered
2011-09-13 10:53:54
2011-09-13 10:53:54

where is the intakje air temp sensoron a 1990 Honda civicdx 1.5

litre?

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


The coolant sensor is also the temperature sensor, it can be found on the head under the distributor for 1.5 liter Civic motors prior to 1992.


Plugged in the intake manifold and the wires/plug are green/white and red/yellow colored according to what I see on the service manual


IAT (INTAKE AIR TEMPERATURE) IT'S LOCATED IN LOWER SIDE OF ADMISSION MANIFOLD,IN FRONT AT FIREWALL IN DRIVER SIDE.



is an 04 honda civic 1.7 liter engine an interference engine


1999 Honda Civic has a 45 liter gas tank - or 11.88 US gallons.


A 1996 Honda Civic will have a 1.6 Liter 4 cylinder engine, regardless of the trim model.


It must be a timing CHAIN . The Gates website does not list a timing belt for the 1.8 liter and the 2.0 liter in a 2007 Honda Civic


The 1993 1.5 liter Honda gearbox is different than the 1998 1.5 liter Honda gearbox. The gearboxes are not interchangeable.


The 2010 Honda Civic ( 1.8 and 2.0 liter four cylinder engines ) has a timing CHAIN


The MAP sensor is located on the intake side before the intake manifold.


The map sensor for a Chevy 5.3 liter engine is on the top of the intake. It is at the back of the engine.


YES, I looked up the 1994 Honda Civic at the Gates website and it shows two different part numbers for the 1.5 liter and the 1.6 liter


if its a 2004 with 1.7 liter with a vtech stock, 127hp. i got 1..put aem intake..u get a few more hp.


The 1996-2000 Honda Civic came with the 1.6-liter SOHC 4-cylinder 16-valve engine.


on the back of the block ,below the intake


When a person is driving a car they should know its fuel capacity. The 1983 Honda Civic has a fuel capacity of 41-liter.


1.5 liter d15b7 non vetec


Basically, a 1.6 Liter 4 cylinder engine.


Replacing a head gasket on a 1.5 liter Honda Civic requires removal of many of the engines components such as the intake manifold, valve cover, and timing belt. After removing the head from the engine it needs to be resurfaced. Replace the old head gasket and machined head onto the block and reinstall all the other components.



There were two motors that could be in that year and model, either the 1.5 liter or the 1.6 liter.


Its the sensor on the air intake that is closest to the butterfly.


The MAF sensor is located between the air filter and the intake manifold.




Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.