the knock sensors are located in the top of the engine block. The intake has to be removed to get to the sensors.
The knock sensor is on the starter side of the engine. It is abut half way between front and back.
On engine block
The knock sensor is located under the Intake Manifold and there is a knock sensor 1/ knock sensor 2 on this model,the 2 is the one in the rear.
The 2006 Dodge charger knock sensor is located on the back of the engine. The knock sensor will be near the bottom of the engine cover.
A knock sensor is a low voltage sensor that sends information to the ecm, and then the ecm makes changes in order to try and control the knocking. In my experience all knock sensors are located on the engine somewhere because that's where the knocking occours.
The knock sensor is located on the side of the engine block near the bellhousing
The knock sensor for a 1996 200sx is located on the passenger side of the engine. It is located under the intake manifold.
The knock sensor for the 1993 Chevy Cavalier is located in the back of the motor. It can also be located in the engine valve.
The Chrysler Sebring knock sensor is located in the engine valve or cylinder located at the back of the motor. This part is in this position next to the engine valve so the sensor can feel the vibration of the engine.
The knock sensor is located on the 95 oldsmobile 98 with a 3800 engine under the midpoint of the heads.
That engine has 2 knock sensors on it and both of them are underneith the intake manifold. You can not see are get to them until the intake has been removed.
there are 2 knock sensors, they are located underneath the intake manifold
The knock sensor is located on top of the block in a 4.8 2002 engine. The intake will have to be removed to get to the sensor.
The knock sensor is located on top of the engine block underneath the intake.
Location of knock sensor 1991 GM sierra 350 2500?
The knock sesor is located, on your Isuzu 1290, at the front of the engine. The sensor screws into the engine. Wires connect the sensor to the senor light.
The knock sensor is located on the front (radiator) side of the engine block above the oil filter The knock sensor is located on the front (radiator) side of the engine block above the oil filter
where is knock sensor on a 2001 sierra 5.3 2wd 1500.
Knock sensor is located on the side of the engine facing the firewall. There is only one sensor at that side.
The knock sensor is on the side of the Escort engine block. It is located close to the oil sensor.
It is located on the side of the engine block. If you have a code for a knock sensor and you have a noise in the engine, it will set the code. That does not mean that the sensor is bad. They very rarely give problems.
they are located under intake manifold The #1 sensor is located in the front of the engine and the #2 sensor is located in the back of the engine. Remember to replace the intake gaskets once you replace the sensor/s. The total time it took me to pull the intake and locate the bad sensor was about 6 hours. Hope this helps
Th knock sensor on a 2002 Nissan Xterra 3.3 is located on the top of the engine. It is mounted under the engine intake.